Iridium switches on satellite NB-IoT: one module, no price, public firmware not until January
Iridium switched on its satellite service NTN Direct on 17 November. IoT devices with a suitable NB-IoT modem are meant to send data worldwide without a dedicated satellite radio. So far, Iridium names a single certified module and no prices.
- Iridium activated NTN Direct on 17 November 2026, a satellite service that carries NB-IoT based on the standard of the mobile standards body 3GPP over 66 satellites in low Earth orbit.
- Iridium has certified Nordic Semiconductor’s nRF9151 as the first module and names no other; already-deployed nRF9151 modules will generally only gain support with a public firmware update that Nordic plans for January 2027.
- Prices, data rates, latency and a country list are missing from Iridium’s announcement, even though Deutsche Telekom reported the service as commercially available to its IoT customers back in September.
US satellite operator Iridium activated NTN Direct on 17 November. The news matters most to makers of trackers, sensors and telematics devices that plan a satellite link as a fallback for areas without cellular coverage. The applications Iridium lists include asset tracking, fleet management, connected vehicles, utility metering and smart agriculture. “Cattle grazes in some of the most remote land on Earth and losing a signal shouldn’t mean losing sight of the herd,” says Fabien Lepoutre, Vice President of Engineering at Nofence, a provider of virtual fencing.
What is behind Iridium NTN Direct?
NTN stands for non-terrestrial network, a mobile network that reaches devices via satellites instead of cell towers. Data travels over NB-IoT, a cellular standard for low-power devices that send small amounts of data. Iridium uses its 66 satellites in low Earth orbit (LEO), which circle at an altitude of around 780 kilometres, and globally coordinated L-band spectrum. The company calls it the first standards-based NB-IoT satellite service with truly global coverage.
This claim has not been independently verified. Satellite NB-IoT has been specified since Release 17, the version of the 3GPP mobile specification completed in 2022. In September 2024, Iridium announced that 3GPP had accepted its request to extend satellite NB-IoT functionality in Release 19. According to Iridium’s product page, NTN Direct is part of that release.
Which devices can use the service?
Standards-based does not mean that every NB-IoT device in the field can connect. The modem must support satellite mode and be approved for the Iridium network. Iridium has certified the nRF9151 from Norwegian chipmaker Nordic Semiconductor as the first module. Iridium names no other.
Already-deployed nRF9151 modules will gain support through a public firmware update. Nordic plans it for January 2027, and according to Iridium no new hardware is needed. Other partners are not there yet. Chipmaker Mlink is already testing its MS150-IR chipset over the Iridium network. Altair Semiconductor is integrating the service into its ALT1350 and ALT1550 chipsets.
What does Iridium leave open?
Iridium names no prices, data rates, latency or maximum message sizes, neither in the announcement nor on the product page. A country list is also missing. Initial availability will vary, Iridium writes, and depends on applicable laws, regulations and service provider conditions.
Whether “activated” means commercial operation or a test phase, the announcement does not say. Deutsche Telekom was quicker with its announcement. As early as 17 September, the group wrote that the technical integration and global roaming agreement with Iridium had been completed. The Iridium constellation, it said, was now commercially available for Deutsche Telekom IoT customers using compatible NB-IoT devices. Initially, this applies to Nordic Semiconductor modules running the latest firmware, which is gradually being released to select customers. Iridium does not explain what the November activation changes for these customers.
Vodafone IoT announced its partnership with Iridium in November 2025 and held out the prospect of a commercial launch in 2026 after integration and testing. In Iridium’s latest announcement, Vodafone IoT appears only in the list of partners. As with the launch of Vodafone’s service with Skylo on 9 November, Iridium leaves out prices and countries. Anyone planning to use NTN Direct has to ask their network operator about tariffs, country approval and firmware status.
Iridium NTN Direct is a satellite service that carries NB-IoT based on the standard of the mobile standards body 3GPP over 66 Iridium satellites in low Earth orbit. IoT devices with a suitable modem can use it to send data without a separate satellite terminal, even where no cellular network is available. Iridium activated the service on 17 November 2026.
Iridium has certified Nordic Semiconductor’s nRF9151 as the first module. For nRF9151 modules already in the field, Nordic plans a public firmware update in January 2027 that enables the service without new hardware. Mlink is testing its MS150-IR chipset over the Iridium network, and Altair Semiconductor is integrating the service into its ALT1350 and ALT1550 chipsets.
No. The modem must support the satellite mode of NB-IoT and be approved for the Iridium network. A conventional NB-IoT device built for cellular networks does not use the service automatically. Whether a device can be upgraded via firmware depends on the module it contains.
Iridium has not published prices for the launch. The company also does not disclose data rates, latency or maximum message sizes. Interested customers have to ask their provider for terms, for example Deutsche Telekom IoT.
Deutsche Telekom said in September 2026 that the Iridium satellites were commercially available to its IoT customers with compatible NB-IoT devices, initially with Nordic modules and new firmware for select customers. Vodafone IoT announced a partnership with Iridium in November 2025 but had not reported a commercial launch by mid-November 2026. Iridium itself publishes no country list.












